GALAXY LX
GALAXY LGX
February 3, 2020
GALAXY LS
February 3, 2020GALAXY LX
FEATURES & SPECIFICATIONS
DIMENSIONS
| MACHINE | Height 2450 mm Width 2200 mm Length 3700 mm *(Can be change as per client / site requirement) |
|---|---|
| INCINERATING CHAMBER | Height 850 mm Width 950 mm Length 2400 mm |
| DOOR (optional with hinges arrangement) |
Sliding Door OR Width upto maximum 1650 mm Height upto maximum 1600 mm |
| CLEAN OUTDOOR | Width upto maximum 550 mm Height upto maximum 550 mm |
| FRONT DOOR FRAME / CAP (Optional) 2900 mm All diemension are with tollerance ± 5 % as per site condition |
|
| WORKING TEMPERATURE | Cremation Chamber 850°C ± 50°C Post Cremation Chamber 1050° C ± 50°C |
| PLC CONTROL PANEL: | Digital PLC control panel inbuilt with machine indicating all parameters |
| OPERATING VOLTAGE: | 415 V. 3 phase, 4 wire AC 50 C/S |
| CREMATION RATES: | 130-150 kg per hour |
| BURNERS OUTPUT: | Maximum input rating 1400000 BTU's per Hour |
| AFTER BURNER: | Maximum 700000 BTU's per hour |
| FUEL REQUIRED: | CNG/LPG Gas with pressure 7"-10" WC |
| AIR REQUIREMENT: | Out side on machine air inlet lowers located at or below burner height capable of passing 2500 cfm of free air |
| POWER REQUIRED: | A) Burners motors - Maximum 1 BHP B) Hot air circulation- Maximum 1 BHP C) Wet Scrubber equipment- Maximum 1 BHP (Optional) D) ID Fan Blower- 5 BHP (Optional) |
| CHIMNEY: | Stainless steel chimney with OD 600mm upto 9 meter from ground level fitted on machine with refractory lining upto 6 meter OR 100 Ft. Height with 300 mm dia at top of MS pipes heavy quality ISI marked with ventury effect nozzle and supporting GI wire guys. |
| REFRACTORY: | High quality branded ISI marked which can with stand temperatures upto 1600°C |
| STAINLESS STEEL FRONT: | Gives good looks, is easy to clean while providing a professional finish to you equipment. This is an important feature when considering |
| REMAINS REMOVAL SYSTEMS: | A separate remains removal door is located at the front (optional backside also) of the unit below main charging door, is in cluided to enable the operator to pull the remains to the front of the chambers. |
| INSTALLATION: | Installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning. |
| WET SCRUBBER (optional): | Stainless steel wet scrubber unit for keeping the hot air gases with in control limits. |
| Conformance to Central Pollution Control Board norms & Respective State Pollution Control Board norms can also be met with. | |
